Installation instructions and maintenance of clarinet       The clarinet is generally installed in the joint, that is, every section has a circle of cork, coated with cork paste lubrication, pay attention not to press on the key, after playing need to remove moisture in the pipe in time, You can use a cloth through the tube to completely remove the water. Clarinet is more afraid of bumps, must pay attention to the use of can. At the same time, it is necessary to remove the whistle, dry and keep the moisture properly, clean the mouth after use, then insert the water from the joint with the cloth, clip the absorbent paper between the pad and the sound hole to dry the moisture, pay attention not to the pad. Weekly with sound hole cleaning rod in the lower side of the key and clearance, do detail cleaning, regular monthly check whether the key condition is flexible, regular cleaning of the key gap dirt, screws are loose, Drop a few drops of key oil on the key screw, regular wipe maintenance can be clarinet longer-term, sound quality will not change.